Concrete Structure Designing for Industrial Projects - Virtual Learning
This Concrete Structure Designing for Industrial Projects training course will fill the gap between the academic knowledge and the professionalism for industrial project design in general, and specifically for Oil & Gas and power generation projects. Reinforced concrete structures are widely used in the industrial sector, especially in the onshore Oil & Gas fields. In industrial projects, the structure design applications are different than normal housing projects taught in educational / engineering institutions.
The basis of design for concrete structure for strength, serviceability, and robustness is considered in the training course. ACI, BS, UBC, and ASCE codes will also be covered to enable the participants to choose a suitable design method to serve business safety and operability. The probability of failure, specifically in ACI and BS, will be discussed, and the key steps in design and review design will be illustrated. Moreover, the attention will be paid for the practical solution of field problems and challenges considering the secondary loads such as wind loads and seismic forces as well.
This Gulf Rowad training course will highlight:
Review of different codes and standards
The importance of construction and maintenance
The dynamic analysis and design for concrete in the industrial plant
Industry practice in the structure design
Integration between different disciplines in designing
Effect of sustainable design to enhance project investment life cycle
5 Days
1620 Sessions
Starting from USD 2,000
Available Face to Face
Course Methodology
This Concrete Structure Designing for Industrial Projects training course will utilise a variety of proven adult learning techniques to ensure maximum understanding, comprehension, and retention of the information presented. The daily workshops will be highly interactive and participative. Videos and photos will be used for illustration.
Course Objectives
This training course is intended to provide the participants with the following:
- An overview of modern and effective procedures for the design of reinforced concrete structures in the Oil & Gas industry
- Knowledge on calculation for reinforced concrete elements used in the Oil & Gas industry
- Increase the knowledge and assist in using new tools for designing and reviewing the design for a new project or modify the existing one
- Knowledge on the design of foundation under all types of vibrating equipment, and the blast design of buildings
- An illustration of real design issues that may assist the designer in providing the concrete structure that is safe, economical and constructible
- The rule of thumb to check the concrete design with an associated checklist
Target Audience
This Concrete Structure Designing for Industrial Projects training course is intended to provide professionals and engineers to be familiar with the American Concrete Institute Standard (ACI) and British standard (BS) for concrete structure designing.
It will also be beneficial for junior or senior level civil and structural engineers who need to have in-depth knowledge about the structural engineering activities and how to co-operate in the design phase.
This GLOMACS training course is a suitably wide range of professionals but will significantly benefit:
- Civil Engineer
- Structural Engineer
- Architectural Engineer
Target Competencies
Organisational Impact
The impact on the organisation upon attending this training course includes the following benefits:
- Reduce the engineering cost as the employees will be capable of doing engineering in-house
- Reduce cost for repair and maintenance by enhancing the repair methodology
- Improve the organization performance by knowing the up to date design and construction technique its technical practice
- Improve the project cost and time by better controlling the design stage
- Improve the abilities of the organization team to be able to design different elements of Reinforced concrete
- Minimizing the waste of maintenance time and money by improving the ability of the organizations’ team to solve the emergence problems by practical solutions
Personal Impact
The participants will gain or enhance their understanding and knowledge by the following:
- Improve the geotechnical background, especially with problematic soils
- Increase knowledge of up to date of the execution phase
- Increase the skill for maintenance approach
- Increase the skill to enhance the quality of all phases of the oil and gas projects
- Develop the concepts of designing the foundations considering the suitable foundation’s type
- Highlight the first principals of the design which enable to solve the problems by practical solutions
Course Outline
Day 1
Introduction to Reinforced Concrete
- The Fundamentals of Concrete Technology
- Comparison between ACI and BS for Concrete Design
- Principal, Limitations for Different Codes in Concrete (ACI, BS codes, European Code)
- Codes and Standards Philosophy
- Define the Different Loads on the Building
- Earthquake and Wind Load Effect
- Define Loads of Static and Dynamic Equipment
- Define the Loads on the Foundation of Tanks
Day 2
First Principals of Structural Reinforced Concrete
- The Basic Concept of Concrete Design
- The Principal of Concrete Design and Precaution
- Different Structure Systems
- Different Slab Types
- Design of Slab, Beam and Columns
- Loads Applied in a Horizontal Vessel (Separators)
- The Effect of Thermal Loads in Heaters
- Design of Heater Foundations
- Design of Foundation Under Tower
Day 3
Geotechnical Problems & Design of Foundations
- Soil Investigation
- Shallow Foundation Design Philosophy
- Pile Foundation Design Philosophy
- Anchor Bolt Design
- Foundation under Machines Design
- Checklist to Review Foundation under Rotating Equipment
- Precaution in Design Foundation under Vibrating Machines
Day 4
Design of Special Reinforced Concrete Constructions I
- Design Blast Resistance Building such as Control Room
- Control Room Layout and Configuration
- Pipe Rack Configuration
- Define Loads which Affect Pipe Rack
- Pipe Rack Design
- Retaining Walls Design Principals and Checks
- Load and Forced in Retaining Walls
Day 5
Design of Special Reinforced Concrete Constructions II
- Design for Reinforced Concrete Liquid Tanks
- Structure System for Concrete Tanks
- Circular and Rectangular Tank
- Ring Beam Design for the Circular Tank
- Maintenance and Repair in Concrete Structure
- Integrity and Maintenance Management System Principal
2026 Schedule & Fees
Course Fees Starting From
USD
2,000
| Date | City | Language | Price | Action |
|---|---|---|---|---|
| 28 Jun - 02 Jul, 2026 | Online | English | USD 2,000 | Book |
| 28 Jun - 02 Jul, 2026 | Online | Arabic | USD 2,000 | Book |
| 05 Jul - 09 Jul, 2026 | Online | English | USD 2,000 | Book |
| 05 Jul - 09 Jul, 2026 | Online | Arabic | USD 2,000 | Book |
| 12 Jul - 16 Jul, 2026 | Online | Arabic | USD 2,000 | Book |
| 12 Jul - 16 Jul, 2026 | Online | English | USD 2,000 | Book |
| 19 Jul - 23 Jul, 2026 | Online | Arabic | USD 2,000 | Book |
| 19 Jul - 23 Jul, 2026 | Online | English | USD 2,000 | Book |
| 26 Jul - 30 Jul, 2026 | Online | English | USD 2,000 | Book |
| 26 Jul - 30 Jul, 2026 | Online | Arabic | USD 2,000 | Book |
| 02 Aug - 06 Aug, 2026 | Online | English | USD 2,000 | Book |
| 02 Aug - 06 Aug, 2026 | Online | Arabic | USD 2,000 | Book |
| 09 Aug - 13 Aug, 2026 | Online | Arabic | USD 2,000 | Book |
| 09 Aug - 13 Aug, 2026 | Online | English | USD 2,000 | Book |
| 16 Aug - 20 Aug, 2026 | Online | Arabic | USD 2,000 | Book |
| 16 Aug - 20 Aug, 2026 | Online | English | USD 2,000 | Book |
| 23 Aug - 27 Aug, 2026 | Online | Arabic | USD 2,000 | Book |
| 23 Aug - 27 Aug, 2026 | Online | English | USD 2,000 | Book |
| 30 Aug - 03 Sep, 2026 | Online | Arabic | USD 2,000 | Book |
| 30 Aug - 03 Sep, 2026 | Online | English | USD 2,000 | Book |
| 06 Sep - 10 Sep, 2026 | Online | Arabic | USD 2,000 | Book |
| 06 Sep - 10 Sep, 2026 | Online | English | USD 2,000 | Book |
| 13 Sep - 17 Sep, 2026 | Online | Arabic | USD 2,000 | Book |
| 13 Sep - 17 Sep, 2026 | Online | English | USD 2,000 | Book |
| 20 Sep - 24 Sep, 2026 | Online | English | USD 2,000 | Book |
| 20 Sep - 24 Sep, 2026 | Online | Arabic | USD 2,000 | Book |
| 27 Sep - 01 Oct, 2026 | Online | English | USD 2,000 | Book |
| 27 Sep - 01 Oct, 2026 | Online | Arabic | USD 2,000 | Book |
| 04 Oct - 08 Oct, 2026 | Online | English | USD 2,000 | Book |
| 04 Oct - 08 Oct, 2026 | Online | Arabic | USD 2,000 | Book |
| 11 Oct - 15 Oct, 2026 | Online | English | USD 2,000 | Book |
| 11 Oct - 15 Oct, 2026 | Online | Arabic | USD 2,000 | Book |
| 18 Oct - 22 Oct, 2026 | Online | Arabic | USD 2,000 | Book |
| 18 Oct - 22 Oct, 2026 | Online | English | USD 2,000 | Book |
| 25 Oct - 29 Oct, 2026 | Online | Arabic | USD 2,000 | Book |
| 25 Oct - 29 Oct, 2026 | Online | English | USD 2,000 | Book |
| 01 Nov - 05 Nov, 2026 | Online | Arabic | USD 2,000 | Book |
| 01 Nov - 05 Nov, 2026 | Online | English | USD 2,000 | Book |
| 08 Nov - 12 Nov, 2026 | Online | Arabic | USD 2,000 | Book |
| 08 Nov - 12 Nov, 2026 | Online | English | USD 2,000 | Book |
| 15 Nov - 19 Nov, 2026 | Online | Arabic | USD 2,000 | Book |
| 15 Nov - 19 Nov, 2026 | Online | English | USD 2,000 | Book |
| 22 Nov - 26 Nov, 2026 | Online | Arabic | USD 2,000 | Book |
| 22 Nov - 26 Nov, 2026 | Online | English | USD 2,000 | Book |
| 29 Nov - 03 Dec, 2026 | Online | English | USD 2,000 | Book |
| 29 Nov - 03 Dec, 2026 | Online | Arabic | USD 2,000 | Book |
| 06 Dec - 10 Dec, 2026 | Online | English | USD 2,000 | Book |
| 06 Dec - 10 Dec, 2026 | Online | Arabic | USD 2,000 | Book |
| 13 Dec - 17 Dec, 2026 | Online | Arabic | USD 2,000 | Book |
| 13 Dec - 17 Dec, 2026 | Online | English | USD 2,000 | Book |
| 20 Dec - 24 Dec, 2026 | Online | Arabic | USD 2,000 | Book |
| 20 Dec - 24 Dec, 2026 | Online | English | USD 2,000 | Book |
| 27 Dec - 31 Dec, 2026 | Online | English | USD 2,000 | Book |
| 27 Dec - 31 Dec, 2026 | Online | Arabic | USD 2,000 | Book |
Face to Face Courses
Face to Face
Concrete Structure Designing for Industrial Projects
5 Days
1566 Sessions
Civil Construction Engineering
We can customize this training course for you!
At Al Mawred, we offer customizable courses designed to fit your specific needs. Whether it's refining technical practices or enhancing leadership and management skills, we tailor our programs to meet your unique goals and challenges. Let us create a training solution that delivers real results for your team.
Request for In-House TrainingReady to advance your career?
Join thousands of professionals who have already enhanced their skills with Al Mawred.
Register for this course